Top Picks
Power your home essentials during outages
The GEYOTO Lineup: At a Glance
Key features and industry-leading performance, at a glance.
FAQs
Will scratches on the solar panel glass affect power generation efficiency?
Scratches on the solar panel glass will directly affect power generation efficiency and reduce light transmittance. When cleaning the solar panel, it is recommended to gently wipe in a single direction during cleaning; do not rub back and forth forcefully.
Do I need a charge controller when connecting multiple solar panels in series or parallel?
No, you don’t need an additional charge controller. Our power stations have a built-in MPPT charge controller that automatically adjusts voltage and current when multiple solar panels are connected in series or parallel. However, please note: when connecting the N1000 power station, the total voltage of series-connected solar panels shall not exceed the maximum PV input voltage of 60V; the total power of parallel-connected solar panels shall not exceed the maximum PV input power of 800W. This ensures safe and efficient charging.
How to adjust the light-tracking angle of the solar panel to improve charging efficiency?
Angle adjustment method:
1. Place the solar panel on the reflector and adjust the bracket so that the solar panel is at a 90° angle to the sunlight.
2. A sundial is integrated on the solar panel. Adjust the panel angle until the sundial shadow points to the center; this will achieve maximum charging efficiency.
What should I do if the charging speed of the solar panel is abnormally slow, or if the glass is broken or the wiring port is loose?
Yes. GEYOTO portable power stations support pass-through charging, which means you can use the device while it is being charged.
This is especially useful for:
• Emergency backup situations
• Continuous use scenarios (routers, CPAP, etc.)
• Outdoor or off-grid environments
Can I use third-party solar panels with your power station? Are there any compatibility risks?
You can use third-party solar panels, but there are compatibility requirements.
The N1000 power station: The solar panel's output voltage must be 11V–60V, and the output wattage must not exceed 800W.
The N300 power station: The solar panel's output voltage must be 15V–36V, and the output wattage must not exceed 140W.
The connector type should also match. The input port of the power station is a single XT60/DC7909 port.
The main risk is mismatched voltage or wattage, which may damage the power station's charging port or BMS. We recommend testing compatibility first or using our original solar panels for safety.
